PM8 First shot drop off

[Ballsey]

Got a PM8 that when left for 30 seconds suffers from massive first shot drop off, it just pfff and the first shot just falls out, had a dye tech look at this weekend he said he couldnt find a problem (dont think he fired it though) I've played with dwell and ABS and still does it. It's also prone to chopping balls, will shoot happily for a thousand plus rounds then decide to 10 or so balls. Any ideas?

 

[soul snatcher24]

take out bolt system, clean and re lube using dye grease or a similar dow33 type

ensure that the dip switches on the board read: 1= up 2= down
this means that ABS is on

take eye covers off and clan the detents, then when re installed check that they are moving and springing back freely

reset the board settings (using manual)

if none of that works, try re setting the LPR, this video should be usefull:

hope this helps
Ryan, team domination

 

[Errol]

Who was the dye Tec?
Ask Rich T from Dye he will be able to help
Have look at front bumper on the bolt that might be the problem...