blackheart board probs

[monkeyman]

As per title guys my blackheart in my ion is now not working I think it is the noid as it powers on and air gets through and resets the bolt but when the trigger is pulled nothing my question is can the noid be striped down and serviced if so can some one who know what they are doin do it for me
Cheer guys
Monkey
Oh and I changed the battery for fresh ones too many times now

 

[soul snatcher24]

does the solenoid cycle (click) when you pull the trigger with no air?

and check that the microswitch wire (from trigger) is in properly, it's also wrth checking the soulder conections on the board too

the ion solenoids are pretty easy to stip anyway, you just have to pop the retaining clip (goldish in colour) off the side and pull the hoses off the top, then you should get a small part (internal of noid) fall out, just make sure this is clear of debre and then put it back together

hope this helps
soul snatcher24

 

[monkeyman]

Right if I pull the trigger and hold without air the noid doesn't click it just hums

 

[soul snatcher24]

but does it make a noise if you just pull the trigger slowly (but not hold) you might need to put your finger in the breach so make sure there is no air in it first

try resetting all the setting on the board back to factory standard, even the firing mode back to semi

if that doesnt work then check it for debre as explained above

 

[monkeyman]

I will try stripping the noid. The noid makes a humming noise no matter how fast I pull the trigger I will let you know how it goes cheers for the help if that doesn't sort it I will just upgrade to the virtue board