Invert mini trouble

[kieran93]

Hi guys

Basically. I tried to gas up my mini this morning and gas was leaking. I fixed the leak and then the eyes stuck on red even when I turned the eyes off. It will only work with one battery and now gas leaks through the barrel and causes the bolt to repeatedly cycle. I have checked all I can and am totally stumped. Help please!!!

 

[BDN]

Try cleaning the poppet face and the face it rests against,then set it according to the manual . That should stop gas leaking through the barrel.
Beyond that, need to know if your marker is stock or has any after-market parts, which
settings are being used, eg. dwell, operating pressure, poppet-setting.
Popular battery to use is Duracell Procell.

 

[rubbish]

sounds like you need a better battery

with the mini (and the tm7 and tm15) when it gets low on battery it won't reset the solonoid and just dump the gas down the barrel.

Put a new battery (try to make sure its a good 1 rather than a smart price 1 or something) in, with no air connected, eyes off and pull the trigger a couple of times...this should reset the solonoid.

now gas up the marker and hopefully it should have stopped leaking

 

[Bolter]

Fixed.