MINI problem

[royanddani]

i have air coming out of the gun i just took it apart for a clean and now i have a problem
can someone help
thanks roy

 

[Scrumpy]

Check your o rings and hpr make sure your on or under the magic 200. Then wait for bolted to see this and give you a more comprehensive answer lol

 

[Bolter]

i have air coming out of the gun i just took it apart for a clean and now i have a problem
can someone help
thanks roy

Exactly where is air coming out from? The bolt/down the barrel? The ASA? Out of the grips? Trigger?

 

[royanddani]

down the barrel mate

 

[d rabe]

what generation invert mini??
try
1. Check Battery
2. Re-set Solenoid
2. Make sure Poppet is pushed all the way forward. Do this by turning velocity adjuster in as far as you can with the gun de-gassed. Then back out the velocity adjuster one full turn, gas up and adjust to desired velocity.
3. Check bolt and poppet guide o-rings.
4. Make certain that no grease is on the poppet seal.
5. Check poppet seal for damage.

 

[royanddani]

mini

I turn the poppet right the way in and a full turn out and the gun is fine now
thanks very much for the help. Roy

 

[d rabe]

great stuff.
They are a great little marker next time you strip it replace the poppet with a gen 2 one, it has a little spring behind it.this problem doesnt happen then ..
And for any major issues BOLTER is the the man for minis .He knows them backwards

 

[Bolter]

great stuff.
They are a great little marker next time you strip it replace the poppet with a gen 2 one, it has a little spring behind it.this problem doesnt happen then ..
And for any major issues BOLTER is the the man for minis .He knows them backwards

Not really, I know the basics, and I know some KEE techs for the hard stuff