Sl94 problem please help

[B19 JPO]

I have a problem with my sl94 I can only just get 300fps with my velocity screw all the way out when I striped the marker down i saw that it had the lp valve guide just wondering if it should have hp valve guide in it? If not can any one recommend any think else it could be? Any help will be much appreciated.

Joe

 

[soul snatcher24]

the low pressure valve is for a softer shot and more gentle on paint

the high pressure valve guide is for better efficiency

i would say as long as you aren't getting inconsistant shots over the chrono or very bad efficiency (number of shots per tank fill) it should not be a problem, just best to take appart both the high and low pressure regs and make sure they are clean and sufficiently lubed

next time you go to a chrono it is worth checking that your LPR is set correctly, simply by increasing the pressure on the LPR and checking whether your velocity increases (without touching the HPR)

hope this helps
Ryan, team domination

 

[nickp]

You could try resetting the LPR to factory default, 2 turns in from flush with lpr cap ( well thats for ego 10 as its not in the sls manual I guess its the same for the SLS)